 |
|
|
|
Next: Here's a License to Print Money: Own a Singles/Da..
|
| Author |
Message |
External
Since: Sep 13, 2006
Posts: 92
|
(Msg. 1) Posted: Thu Nov 16, 2006 5:53 pm
Post subject: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN
Archived from groups: ia>jobs, others (more info?)
|
|
|
THOMAS GUGGER
INDEPENDENT RECRUITER
tgugger RemoveThis @sbcglobal.net
419-537-9447
SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS / IN
CONTRACT OR PERM
We have a three to six month contract in the Fort Wayne, IN area. The
Software Engineer that will fill this contract will have solid experience in
C, Assembly,
embedded software, microprocessors, and a background in ECM. The company
does much work in electric motor controls. ECM= electronically commutated
motors.
The consultant will be designing and implementing new software for
testing,
To support testing and programs. At the end of this contract the consultant
will
probably be given an opportunity to go perm if desired. Going perm is not a
condition
of the contract. An EE degree would be nice, but not required. This is a Nov
27th
start, all work done on site, no H1s. This is a major manufacturing company
that
offers full benefits on the career position side. If someone wants only a
direct hire,
that could be possible.
If interested and qualified, please answer the six questions at the bottom
of the page.
Email answers WITH a resume that reflects the needed skills to:
tgugger RemoveThis @sbcglobal.net.
1.. C experience -------------------yrs
2.. Assembly exp ------------------ yrs
3.. microprocessors exp ---------- yrs
4.. Motor Control exp ----------------------- yrs
5.. Citizenship Status ------------- yrs
6.. Rate (1099 or W2) ------------- pr hr
Contractor covers their own expenses
--
TOM GUGGER
INDEPENDENT RECRUITER
tgugger RemoveThis @sbcglobal.net
419-537-9447 OFFICE
419-250-8853 CELL |
|
| Back to top |
|
 | |
External
Since: Sep 13, 2006
Posts: 92
|
(Msg. 2) Posted: Thu Nov 16, 2006 5:53 pm
Post subject: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN
Archived from groups: per prev. post (more info?)
|
|
|
THOMAS GUGGER
INDEPENDENT RECRUITER
tgugger.DeleteThis@sbcglobal.net
419-537-9447
SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS / IN
CONTRACT OR PERM
We have a three to six month contract in the Fort Wayne, IN area. The
Software Engineer that will fill this contract will have solid experience in
C, Assembly,
embedded software, microprocessors, and a background in ECM. The company
does much work in electric motor controls. ECM= electronically commutated
motors.
The consultant will be designing and implementing new software for
testing,
To support testing and programs. At the end of this contract the consultant
will
probably be given an opportunity to go perm if desired. Going perm is not a
condition
of the contract. An EE degree would be nice, but not required. This is a Nov
27th
start, all work done on site, no H1s. This is a major manufacturing company
that
offers full benefits on the career position side. If someone wants only a
direct hire,
that could be possible.
If interested and qualified, please answer the six questions at the bottom
of the page.
Email answers WITH a resume that reflects the needed skills to:
tgugger.DeleteThis@sbcglobal.net.
1.. C experience -------------------yrs
2.. Assembly exp ------------------ yrs
3.. microprocessors exp ---------- yrs
4.. Motor Control exp ----------------------- yrs
5.. Citizenship Status ------------- yrs
6.. Rate (1099 or W2) ------------- pr hr
Contractor covers their own expenses
--
TOM GUGGER
INDEPENDENT RECRUITER
tgugger.DeleteThis@sbcglobal.net
419-537-9447 OFFICE
419-250-8853 CELL |
|
| Back to top |
|
| |
External
Since: Sep 13, 2006
Posts: 92
|
(Msg. 3) Posted: Thu Nov 16, 2006 5:53 pm
Post subject: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN
Archived from groups: per prev. post (more info?)
|
|
|
THOMAS GUGGER
INDEPENDENT RECRUITER
tgugger.TakeThisOut@sbcglobal.net
419-537-9447
SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS / IN
CONTRACT OR PERM
We have a three to six month contract in the Fort Wayne, IN area. The
Software Engineer that will fill this contract will have solid experience in
C, Assembly,
embedded software, microprocessors, and a background in ECM. The company
does much work in electric motor controls. ECM= electronically commutated
motors.
The consultant will be designing and implementing new software for
testing,
To support testing and programs. At the end of this contract the consultant
will
probably be given an opportunity to go perm if desired. Going perm is not a
condition
of the contract. An EE degree would be nice, but not required. This is a Nov
27th
start, all work done on site, no H1s. This is a major manufacturing company
that
offers full benefits on the career position side. If someone wants only a
direct hire,
that could be possible.
If interested and qualified, please answer the six questions at the bottom
of the page.
Email answers WITH a resume that reflects the needed skills to:
tgugger.TakeThisOut@sbcglobal.net.
1.. C experience -------------------yrs
2.. Assembly exp ------------------ yrs
3.. microprocessors exp ---------- yrs
4.. Motor Control exp ----------------------- yrs
5.. Citizenship Status ------------- yrs
6.. Rate (1099 or W2) ------------- pr hr
Contractor covers their own expenses
--
TOM GUGGER
INDEPENDENT RECRUITER
tgugger.TakeThisOut@sbcglobal.net
419-537-9447 OFFICE
419-250-8853 CELL >> Stay informed about: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN |
|
| Back to top |
|
| |
External
Since: Sep 13, 2006
Posts: 92
|
(Msg. 4) Posted: Thu Nov 16, 2006 5:53 pm
Post subject: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN
Archived from groups: per prev. post (more info?)
|
|
|
THOMAS GUGGER
INDEPENDENT RECRUITER
tgugger.TakeThisOut@sbcglobal.net
419-537-9447
SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS / IN
CONTRACT OR PERM
We have a three to six month contract in the Fort Wayne, IN area. The
Software Engineer that will fill this contract will have solid experience in
C, Assembly,
embedded software, microprocessors, and a background in ECM. The company
does much work in electric motor controls. ECM= electronically commutated
motors.
The consultant will be designing and implementing new software for
testing,
To support testing and programs. At the end of this contract the consultant
will
probably be given an opportunity to go perm if desired. Going perm is not a
condition
of the contract. An EE degree would be nice, but not required. This is a Nov
27th
start, all work done on site, no H1s. This is a major manufacturing company
that
offers full benefits on the career position side. If someone wants only a
direct hire,
that could be possible.
If interested and qualified, please answer the six questions at the bottom
of the page.
Email answers WITH a resume that reflects the needed skills to:
tgugger.TakeThisOut@sbcglobal.net.
1.. C experience -------------------yrs
2.. Assembly exp ------------------ yrs
3.. microprocessors exp ---------- yrs
4.. Motor Control exp ----------------------- yrs
5.. Citizenship Status ------------- yrs
6.. Rate (1099 or W2) ------------- pr hr
Contractor covers their own expenses
--
TOM GUGGER
INDEPENDENT RECRUITER
tgugger.TakeThisOut@sbcglobal.net
419-537-9447 OFFICE
419-250-8853 CELL >> Stay informed about: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN |
|
| Back to top |
|
| |
External
Since: Sep 13, 2006
Posts: 92
|
(Msg. 5) Posted: Thu Nov 16, 2006 5:53 pm
Post subject: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN
Archived from groups: per prev. post (more info?)
|
|
|
THOMAS GUGGER
INDEPENDENT RECRUITER
tgugger.DeleteThis@sbcglobal.net
419-537-9447
SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS / IN
CONTRACT OR PERM
We have a three to six month contract in the Fort Wayne, IN area. The
Software Engineer that will fill this contract will have solid experience in
C, Assembly,
embedded software, microprocessors, and a background in ECM. The company
does much work in electric motor controls. ECM= electronically commutated
motors.
The consultant will be designing and implementing new software for
testing,
To support testing and programs. At the end of this contract the consultant
will
probably be given an opportunity to go perm if desired. Going perm is not a
condition
of the contract. An EE degree would be nice, but not required. This is a Nov
27th
start, all work done on site, no H1s. This is a major manufacturing company
that
offers full benefits on the career position side. If someone wants only a
direct hire,
that could be possible.
If interested and qualified, please answer the six questions at the bottom
of the page.
Email answers WITH a resume that reflects the needed skills to:
tgugger.DeleteThis@sbcglobal.net.
1.. C experience -------------------yrs
2.. Assembly exp ------------------ yrs
3.. microprocessors exp ---------- yrs
4.. Motor Control exp ----------------------- yrs
5.. Citizenship Status ------------- yrs
6.. Rate (1099 or W2) ------------- pr hr
Contractor covers their own expenses
--
TOM GUGGER
INDEPENDENT RECRUITER
tgugger.DeleteThis@sbcglobal.net
419-537-9447 OFFICE
419-250-8853 CELL >> Stay informed about: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN |
|
| Back to top |
|
| |
External
Since: Sep 13, 2006
Posts: 92
|
(Msg. 6) Posted: Thu Nov 16, 2006 5:53 pm
Post subject: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN
Archived from groups: per prev. post (more info?)
|
|
|
THOMAS GUGGER
INDEPENDENT RECRUITER
tgugger.TakeThisOut@sbcglobal.net
419-537-9447
SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS / IN
CONTRACT OR PERM
We have a three to six month contract in the Fort Wayne, IN area. The
Software Engineer that will fill this contract will have solid experience in
C, Assembly,
embedded software, microprocessors, and a background in ECM. The company
does much work in electric motor controls. ECM= electronically commutated
motors.
The consultant will be designing and implementing new software for
testing,
To support testing and programs. At the end of this contract the consultant
will
probably be given an opportunity to go perm if desired. Going perm is not a
condition
of the contract. An EE degree would be nice, but not required. This is a Nov
27th
start, all work done on site, no H1s. This is a major manufacturing company
that
offers full benefits on the career position side. If someone wants only a
direct hire,
that could be possible.
If interested and qualified, please answer the six questions at the bottom
of the page.
Email answers WITH a resume that reflects the needed skills to:
tgugger.TakeThisOut@sbcglobal.net.
1.. C experience -------------------yrs
2.. Assembly exp ------------------ yrs
3.. microprocessors exp ---------- yrs
4.. Motor Control exp ----------------------- yrs
5.. Citizenship Status ------------- yrs
6.. Rate (1099 or W2) ------------- pr hr
Contractor covers their own expenses
--
TOM GUGGER
INDEPENDENT RECRUITER
tgugger.TakeThisOut@sbcglobal.net
419-537-9447 OFFICE
419-250-8853 CELL >> Stay informed about: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN |
|
| Back to top |
|
| |
External
Since: Sep 13, 2006
Posts: 92
|
(Msg. 7) Posted: Thu Nov 16, 2006 5:53 pm
Post subject: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN
Archived from groups: per prev. post (more info?)
|
|
|
THOMAS GUGGER
INDEPENDENT RECRUITER
tgugger DeleteThis @sbcglobal.net
419-537-9447
SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS / IN
CONTRACT OR PERM
We have a three to six month contract in the Fort Wayne, IN area. The
Software Engineer that will fill this contract will have solid experience in
C, Assembly,
embedded software, microprocessors, and a background in ECM. The company
does much work in electric motor controls. ECM= electronically commutated
motors.
The consultant will be designing and implementing new software for
testing,
To support testing and programs. At the end of this contract the consultant
will
probably be given an opportunity to go perm if desired. Going perm is not a
condition
of the contract. An EE degree would be nice, but not required. This is a Nov
27th
start, all work done on site, no H1s. This is a major manufacturing company
that
offers full benefits on the career position side. If someone wants only a
direct hire,
that could be possible.
If interested and qualified, please answer the six questions at the bottom
of the page.
Email answers WITH a resume that reflects the needed skills to:
tgugger DeleteThis @sbcglobal.net.
1.. C experience -------------------yrs
2.. Assembly exp ------------------ yrs
3.. microprocessors exp ---------- yrs
4.. Motor Control exp ----------------------- yrs
5.. Citizenship Status ------------- yrs
6.. Rate (1099 or W2) ------------- pr hr
Contractor covers their own expenses
--
TOM GUGGER
INDEPENDENT RECRUITER
tgugger DeleteThis @sbcglobal.net
419-537-9447 OFFICE
419-250-8853 CELL >> Stay informed about: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN |
|
| Back to top |
|
| |
External
Since: Sep 13, 2006
Posts: 92
|
(Msg. 8) Posted: Thu Nov 16, 2006 5:53 pm
Post subject: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN
Archived from groups: per prev. post (more info?)
|
|
|
THOMAS GUGGER
INDEPENDENT RECRUITER
tgugger RemoveThis @sbcglobal.net
419-537-9447
SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS / IN
CONTRACT OR PERM
We have a three to six month contract in the Fort Wayne, IN area. The
Software Engineer that will fill this contract will have solid experience in
C, Assembly,
embedded software, microprocessors, and a background in ECM. The company
does much work in electric motor controls. ECM= electronically commutated
motors.
The consultant will be designing and implementing new software for
testing,
To support testing and programs. At the end of this contract the consultant
will
probably be given an opportunity to go perm if desired. Going perm is not a
condition
of the contract. An EE degree would be nice, but not required. This is a Nov
27th
start, all work done on site, no H1s. This is a major manufacturing company
that
offers full benefits on the career position side. If someone wants only a
direct hire,
that could be possible.
If interested and qualified, please answer the six questions at the bottom
of the page.
Email answers WITH a resume that reflects the needed skills to:
tgugger RemoveThis @sbcglobal.net.
1.. C experience -------------------yrs
2.. Assembly exp ------------------ yrs
3.. microprocessors exp ---------- yrs
4.. Motor Control exp ----------------------- yrs
5.. Citizenship Status ------------- yrs
6.. Rate (1099 or W2) ------------- pr hr
Contractor covers their own expenses
--
TOM GUGGER
INDEPENDENT RECRUITER
tgugger RemoveThis @sbcglobal.net
419-537-9447 OFFICE
419-250-8853 CELL >> Stay informed about: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN |
|
| Back to top |
|
| |
External
Since: Sep 13, 2006
Posts: 92
|
(Msg. 9) Posted: Thu Nov 16, 2006 5:53 pm
Post subject: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN
Archived from groups: per prev. post (more info?)
|
|
|
THOMAS GUGGER
INDEPENDENT RECRUITER
tgugger DeleteThis @sbcglobal.net
419-537-9447
SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS / IN
CONTRACT OR PERM
We have a three to six month contract in the Fort Wayne, IN area. The
Software Engineer that will fill this contract will have solid experience in
C, Assembly,
embedded software, microprocessors, and a background in ECM. The company
does much work in electric motor controls. ECM= electronically commutated
motors.
The consultant will be designing and implementing new software for
testing,
To support testing and programs. At the end of this contract the consultant
will
probably be given an opportunity to go perm if desired. Going perm is not a
condition
of the contract. An EE degree would be nice, but not required. This is a Nov
27th
start, all work done on site, no H1s. This is a major manufacturing company
that
offers full benefits on the career position side. If someone wants only a
direct hire,
that could be possible.
If interested and qualified, please answer the six questions at the bottom
of the page.
Email answers WITH a resume that reflects the needed skills to:
tgugger DeleteThis @sbcglobal.net.
1.. C experience -------------------yrs
2.. Assembly exp ------------------ yrs
3.. microprocessors exp ---------- yrs
4.. Motor Control exp ----------------------- yrs
5.. Citizenship Status ------------- yrs
6.. Rate (1099 or W2) ------------- pr hr
Contractor covers their own expenses
--
TOM GUGGER
INDEPENDENT RECRUITER
tgugger DeleteThis @sbcglobal.net
419-537-9447 OFFICE
419-250-8853 CELL >> Stay informed about: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN |
|
| Back to top |
|
| |
External
Since: Sep 13, 2006
Posts: 92
|
(Msg. 10) Posted: Thu Nov 16, 2006 5:53 pm
Post subject: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN
Archived from groups: per prev. post (more info?)
|
|
|
THOMAS GUGGER
INDEPENDENT RECRUITER
tgugger DeleteThis @sbcglobal.net
419-537-9447
SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS / IN
CONTRACT OR PERM
We have a three to six month contract in the Fort Wayne, IN area. The
Software Engineer that will fill this contract will have solid experience in
C, Assembly,
embedded software, microprocessors, and a background in ECM. The company
does much work in electric motor controls. ECM= electronically commutated
motors.
The consultant will be designing and implementing new software for
testing,
To support testing and programs. At the end of this contract the consultant
will
probably be given an opportunity to go perm if desired. Going perm is not a
condition
of the contract. An EE degree would be nice, but not required. This is a Nov
27th
start, all work done on site, no H1s. This is a major manufacturing company
that
offers full benefits on the career position side. If someone wants only a
direct hire,
that could be possible.
If interested and qualified, please answer the six questions at the bottom
of the page.
Email answers WITH a resume that reflects the needed skills to:
tgugger DeleteThis @sbcglobal.net.
1.. C experience -------------------yrs
2.. Assembly exp ------------------ yrs
3.. microprocessors exp ---------- yrs
4.. Motor Control exp ----------------------- yrs
5.. Citizenship Status ------------- yrs
6.. Rate (1099 or W2) ------------- pr hr
Contractor covers their own expenses
--
TOM GUGGER
INDEPENDENT RECRUITER
tgugger DeleteThis @sbcglobal.net
419-537-9447 OFFICE
419-250-8853 CELL >> Stay informed about: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN |
|
| Back to top |
|
| |
External
Since: Sep 13, 2006
Posts: 92
|
(Msg. 11) Posted: Thu Nov 16, 2006 5:53 pm
Post subject: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN
Archived from groups: per prev. post (more info?)
|
|
|
THOMAS GUGGER
INDEPENDENT RECRUITER
tgugger.DeleteThis@sbcglobal.net
419-537-9447
SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS / IN
CONTRACT OR PERM
We have a three to six month contract in the Fort Wayne, IN area. The
Software Engineer that will fill this contract will have solid experience in
C, Assembly,
embedded software, microprocessors, and a background in ECM. The company
does much work in electric motor controls. ECM= electronically commutated
motors.
The consultant will be designing and implementing new software for
testing,
To support testing and programs. At the end of this contract the consultant
will
probably be given an opportunity to go perm if desired. Going perm is not a
condition
of the contract. An EE degree would be nice, but not required. This is a Nov
27th
start, all work done on site, no H1s. This is a major manufacturing company
that
offers full benefits on the career position side. If someone wants only a
direct hire,
that could be possible.
If interested and qualified, please answer the six questions at the bottom
of the page.
Email answers WITH a resume that reflects the needed skills to:
tgugger.DeleteThis@sbcglobal.net.
1.. C experience -------------------yrs
2.. Assembly exp ------------------ yrs
3.. microprocessors exp ---------- yrs
4.. Motor Control exp ----------------------- yrs
5.. Citizenship Status ------------- yrs
6.. Rate (1099 or W2) ------------- pr hr
Contractor covers their own expenses
--
TOM GUGGER
INDEPENDENT RECRUITER
tgugger.DeleteThis@sbcglobal.net
419-537-9447 OFFICE
419-250-8853 CELL >> Stay informed about: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN |
|
| Back to top |
|
| |
External
Since: Sep 13, 2006
Posts: 92
|
(Msg. 12) Posted: Thu Nov 16, 2006 5:53 pm
Post subject: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN
Archived from groups: per prev. post (more info?)
|
|
|
THOMAS GUGGER
INDEPENDENT RECRUITER
tgugger.TakeThisOut@sbcglobal.net
419-537-9447
SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS / IN
CONTRACT OR PERM
We have a three to six month contract in the Fort Wayne, IN area. The
Software Engineer that will fill this contract will have solid experience in
C, Assembly,
embedded software, microprocessors, and a background in ECM. The company
does much work in electric motor controls. ECM= electronically commutated
motors.
The consultant will be designing and implementing new software for
testing,
To support testing and programs. At the end of this contract the consultant
will
probably be given an opportunity to go perm if desired. Going perm is not a
condition
of the contract. An EE degree would be nice, but not required. This is a Nov
27th
start, all work done on site, no H1s. This is a major manufacturing company
that
offers full benefits on the career position side. If someone wants only a
direct hire,
that could be possible.
If interested and qualified, please answer the six questions at the bottom
of the page.
Email answers WITH a resume that reflects the needed skills to:
tgugger.TakeThisOut@sbcglobal.net.
1.. C experience -------------------yrs
2.. Assembly exp ------------------ yrs
3.. microprocessors exp ---------- yrs
4.. Motor Control exp ----------------------- yrs
5.. Citizenship Status ------------- yrs
6.. Rate (1099 or W2) ------------- pr hr
Contractor covers their own expenses
--
TOM GUGGER
INDEPENDENT RECRUITER
tgugger.TakeThisOut@sbcglobal.net
419-537-9447 OFFICE
419-250-8853 CELL >> Stay informed about: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN |
|
| Back to top |
|
| |
External
Since: Sep 13, 2006
Posts: 92
|
(Msg. 13) Posted: Thu Nov 16, 2006 5:53 pm
Post subject: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN
Archived from groups: per prev. post (more info?)
|
|
|
THOMAS GUGGER
INDEPENDENT RECRUITER
tgugger DeleteThis @sbcglobal.net
419-537-9447
SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS / IN
CONTRACT OR PERM
We have a three to six month contract in the Fort Wayne, IN area. The
Software Engineer that will fill this contract will have solid experience in
C, Assembly,
embedded software, microprocessors, and a background in ECM. The company
does much work in electric motor controls. ECM= electronically commutated
motors.
The consultant will be designing and implementing new software for
testing,
To support testing and programs. At the end of this contract the consultant
will
probably be given an opportunity to go perm if desired. Going perm is not a
condition
of the contract. An EE degree would be nice, but not required. This is a Nov
27th
start, all work done on site, no H1s. This is a major manufacturing company
that
offers full benefits on the career position side. If someone wants only a
direct hire,
that could be possible.
If interested and qualified, please answer the six questions at the bottom
of the page.
Email answers WITH a resume that reflects the needed skills to:
tgugger DeleteThis @sbcglobal.net.
1.. C experience -------------------yrs
2.. Assembly exp ------------------ yrs
3.. microprocessors exp ---------- yrs
4.. Motor Control exp ----------------------- yrs
5.. Citizenship Status ------------- yrs
6.. Rate (1099 or W2) ------------- pr hr
Contractor covers their own expenses
--
TOM GUGGER
INDEPENDENT RECRUITER
tgugger DeleteThis @sbcglobal.net
419-537-9447 OFFICE
419-250-8853 CELL >> Stay informed about: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN |
|
| Back to top |
|
| |
External
Since: Sep 13, 2006
Posts: 92
|
(Msg. 14) Posted: Thu Nov 16, 2006 5:53 pm
Post subject: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN
Archived from groups: per prev. post (more info?)
|
|
|
THOMAS GUGGER
INDEPENDENT RECRUITER
tgugger DeleteThis @sbcglobal.net
419-537-9447
SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS / IN
CONTRACT OR PERM
We have a three to six month contract in the Fort Wayne, IN area. The
Software Engineer that will fill this contract will have solid experience in
C, Assembly,
embedded software, microprocessors, and a background in ECM. The company
does much work in electric motor controls. ECM= electronically commutated
motors.
The consultant will be designing and implementing new software for
testing,
To support testing and programs. At the end of this contract the consultant
will
probably be given an opportunity to go perm if desired. Going perm is not a
condition
of the contract. An EE degree would be nice, but not required. This is a Nov
27th
start, all work done on site, no H1s. This is a major manufacturing company
that
offers full benefits on the career position side. If someone wants only a
direct hire,
that could be possible.
If interested and qualified, please answer the six questions at the bottom
of the page.
Email answers WITH a resume that reflects the needed skills to:
tgugger DeleteThis @sbcglobal.net.
1.. C experience -------------------yrs
2.. Assembly exp ------------------ yrs
3.. microprocessors exp ---------- yrs
4.. Motor Control exp ----------------------- yrs
5.. Citizenship Status ------------- yrs
6.. Rate (1099 or W2) ------------- pr hr
Contractor covers their own expenses
--
TOM GUGGER
INDEPENDENT RECRUITER
tgugger DeleteThis @sbcglobal.net
419-537-9447 OFFICE
419-250-8853 CELL >> Stay informed about: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN |
|
| Back to top |
|
| |
External
Since: Sep 13, 2006
Posts: 92
|
(Msg. 15) Posted: Thu Nov 16, 2006 5:53 pm
Post subject: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN
Archived from groups: per prev. post (more info?)
|
|
|
THOMAS GUGGER
INDEPENDENT RECRUITER
tgugger.TakeThisOut@sbcglobal.net
419-537-9447
SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS / IN
CONTRACT OR PERM
We have a three to six month contract in the Fort Wayne, IN area. The
Software Engineer that will fill this contract will have solid experience in
C, Assembly,
embedded software, microprocessors, and a background in ECM. The company
does much work in electric motor controls. ECM= electronically commutated
motors.
The consultant will be designing and implementing new software for
testing,
To support testing and programs. At the end of this contract the consultant
will
probably be given an opportunity to go perm if desired. Going perm is not a
condition
of the contract. An EE degree would be nice, but not required. This is a Nov
27th
start, all work done on site, no H1s. This is a major manufacturing company
that
offers full benefits on the career position side. If someone wants only a
direct hire,
that could be possible.
If interested and qualified, please answer the six questions at the bottom
of the page.
Email answers WITH a resume that reflects the needed skills to:
tgugger.TakeThisOut@sbcglobal.net.
1.. C experience -------------------yrs
2.. Assembly exp ------------------ yrs
3.. microprocessors exp ---------- yrs
4.. Motor Control exp ----------------------- yrs
5.. Citizenship Status ------------- yrs
6.. Rate (1099 or W2) ------------- pr hr
Contractor covers their own expenses
--
TOM GUGGER
INDEPENDENT RECRUITER
tgugger.TakeThisOut@sbcglobal.net
419-537-9447 OFFICE
419-250-8853 CELL >> Stay informed about: SOFTWARE ENGINEER/ ELECTRIC MOTOR CONTROLS/ IN |
|
| Back to top |
|
| |
|
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Search
Profile
Private Messages
Log in
